12Vdc的荧光灯驱动电路-12VDC Fluorescent Lamp Driver

A number of people have been unable to find the transformer needed for the Black Light project, so I looked around to see if I could find a fluorescent lamp driver that does not require any special components. I finally found border=0>

Parts:

Part
 Total Qty.
 Description
 Substitutions
 
C1
 1
 100uf 25V Electrolytic Capacitor
 
 
C2,C3
 2
 0.01uf 25V Ceramic Disc Capacitor
 
 
C4
 1
 0.01uf 1KV Ceramic Disc Capacitor
 
 
R1
 1
 1K 1/4W Resistor
 
 
R2
 1
 2.7K 1/4W Resistor
 
 
Q1
 1
 IRF510 MOSFET
 
 
U1
 1
 TLC555 Timer IC
 
 
T1
 1
 6V 300mA Transformer
 
 
LAMP
 1
 4W Fluorescent Lamp
 
 
MISC
 1
 Board, Wire, Heatsink For Q1
 
 Notes:
1. Q1 must be installed on a heat sink.

2. A 240V to 10V transformer will work better then the one in the parts list. The problem is that they are hard to find.

3. This circuit can give a nasty (but not too dangerous) shock. Be careful around the output leads.