10
mx29f004t/b
p/n:pm0554 rev. 1.4, 六月. 12, 2001
擦掉 suspend
这个 command 仅有的 有 meaning 当 这 状态 机器
是 executing 自动 sector 擦掉 运作, 和
因此 将 仅有的 是 responded 在 自动 sector
擦掉 运作. 当 这 擦掉 suspend command 是
写 在 一个 sector 擦掉 运作, 这 设备 需要
一个 最大 的 100us 至 suspend 这 擦掉 行动.
不管怎样, 当 这 擦掉 suspend command 是 写
在 这 sector 擦掉 时间-输出, 这 设备 立即
terminates 这 时间-输出 时期 和 suspends 这 擦掉
运作. 之后 这个 command 有 被 executed, 这
command 寄存器 将 initiate 擦掉 suspend 模式. 这
状态 机器 将 返回 至 读 模式 automatically 之后
suspend 是 准备好. 在 这个 时间, 状态 机器 仅有的 准许
这 command 寄存器 至 respond 至 这 读 记忆
排列, 擦掉 重新开始 和 程序 commands.
这 系统 能 决定 这 状态 的 这 程序
运作 使用 这 q7 或者 q6 状态 位, just 作 在 这
标准 程序 运作. 之后 一个 擦掉-suspend
程序 运作 是 完全, 这 系统 能 once
又一次 读 排列 数据 在里面 非-suspended sectors.
擦掉 重新开始
这个 command 将 导致 这 command 寄存器 至 clear
这 suspend 状态 和 返回 后面的 至 sector 擦掉 模式
但是 仅有的 如果 一个 擦掉 suspend command 是 先前
issued. 擦掉 重新开始 将 不 有 任何 效应 在 所有
其它 情况.另一 擦掉 suspend command 能
是 写 之后 这 碎片 有 resumed erasing.
设置-向上 自动 程序
COMMANDS
至 initiate 自动 程序 模式, 一个 三-循环
command sequence 是 必需的. 那里 是 二 "unlock"
写 循环. 这些 是 followed 用 writing 这 自动
程序 command a0h.
once 这 自动 程序 command 是 initiated, 这
next 我们 或者 ce 脉冲波 导致 一个 转变 至 一个 起作用的
程序编制 运作. 地址 是 latched 在 这
下落 边缘, 和 数据 是 内部 latched 在 这 rising
边缘 的 这 我们 或者 ce, whicheven 发生 第一 脉冲波.
这 rising 边缘 的 我们 或者 ce, whicheven 发生 第一
也 begins 这 程序编制 运作. 这 系统 是
不 必需的 至 提供 更远 控制 或者 timings. 这
设备 将 automatically 提供 一个 足够的 内部
发生 程序 脉冲波 和 核实 余裕.
如果 这 程序 opetation 是 unsuccessful, 这 数据 在
q5 是 "1"(看 表格 4), 表明 这 程序 运作
超过 内部的 定时 限制. 这 自动 程序编制
运作 是 完成 当 这 数据 读 在 q6 stops
toggling 为 二 consecutive 读 循环 和 这 数据 在
q7 和 q6 是 相等的 至 数据 写 至 这些 二
位, 在 这个 时间 这 设备 returns 至 这 读
模式(非 程序 核实 command 是 必需的).
数据 polling-q7
这 mx29f004t/b 也 特性 数据 polling 作 一个
方法 至 表明 至 这 host 系统 那 这 自动
程序 或者 擦掉 algorithms 是 也 在 progress 或者
完成.
当 这 自动 程序编制 algorithm 是 在
运作, 一个 attempt 至 读 这 设备 将 生产 这
complement 数据 的 这 数据 last 写 至 q7. 在之上
completion 的 这 自动 程序 algorithm 一个
attempt 至 读 这 设备 将 生产 这 真实 数据 last
写 至 q7. 这 数据 polling 特性 是 有效的 之后 这
rising 边缘 的 这 fourth 我们 或者 ce, whicheven 发生
第一 脉冲波 的 这 四 写 脉冲波 sequences 为 自动
程序.
当 这 自动 擦掉 algorithm 是 在 运作, q7
将 读 "0" 直到 这 擦掉 运作 是 competed. 在之上
completion 的 这 擦掉 运作, 这 数据 在 q7 将
读 "1". 这 数据 polling 特性 是 有效的 之后 这 rising
边缘 的 这 sixth 我们 或者 ce, whicheven 发生 第一
脉冲波 的 六 写 脉冲波 sequences 为 自动 碎片/
sector 擦掉.
这 数据 polling 特性 是 起作用的 在 自动
程序/擦掉 algorithm 或者 sector 擦掉 时间-输出.(看
部分 q3 sector 擦掉 计时器)