CHRONTEL
CH7203
6 201-0000-031 rev 2.0,6/2/99
一般 描述
The ch7203是 一个 全部y 在tegrated solution为 converting 16-b它 ycrcb(4:2:2) digital video在puts 在至high-
qualityNTSCorPALvideo signals while generating所有 essential clocksignalsforMPEGplayback.所有
essential 电路系统 为 th是 con版本一个d 时钟generation(双 pll’s, linear interpolator, digital 过滤,
NTSc/pal encoder, dac’s)是包含在 这 ch7203制造 它 一个 essential 组件 的任何 低-cost
解决方案 为 video-cd playback machines. 谈及 至 这 块 diagram 在 页 1 和 这 interface 图解 在
页 5.
Functional description
The encodedlu最小值ance (y)和color-difference(u,v) 是interpolated, 一个d filtered throughdigital 过滤 至
最小值imize aliasingproblems. the filteredsignals go 至 这 digital encoder where 它们 是 transformed至
composite 和 s-video 输出, 和 然后 它们 是 转变 用 这 三 9-bit dacs 至 相似物 输出.
16-bit ycrcb(4:2:2) 在放
y 数据 is 在put through the y[7:0] 在puts一个dCrCb数据 是multiplexed through这c[7:0] 在puts.当
CRSen* =1, the cr 选择 输入, crs, 是 ignored, 和 所有 甚至 horizontal pixels 是 cb 数据 和 所有 odd
horizont一个l pixels areCr.Refert o
图示 6
on page 7 为 the definitionof “even” 一个d “odd” pixels. 当
CRSen* = 0, 这 alternating crs 信号 specifies 这 crCb sequence. crs = 1 indicates c[7:0] carries cr
数据, 和 crs = 0 indicates c[7:0] carries cb 数据.
Clock/Data/synchronizati在 timing
这 ch7203 不 only 工作作一个 ntsc/pal encoder, 它 也 供应这 需要 clocks (1x pixel, 2x
pixel, video 系统, 和 音频的) 和 同步 (hsync* 和 vsync*) 信号 至 其它 building blocks
在 the videosystem. for th是 reason, 这 ch7203 works
only
在 这 主控 mode.
它 是 important 至note the ch7203 做es 非t have 一个 “pixel clock” input p在. therefore, 这 timing issues related
至 videopixel d一个ta是ing supplied from, f或者example,这MPEGdecoder,to theCH7203(pinsY[7:0]一个nd
C[7:0])needto 是cl一个rified.一个ssumet hepixel synchr在iz一个tion的一个 systemis based在这2Xpixelclock
(2xplck).在this 类型的设计,2XPCLK是distributed across the 全部 video 系统,和 it 是也 使用 至
获得 这 新当选的 数据 appearing 在 管脚 y[7:0] 和 c[7:0].
图示 7
在page8shows所有 timing referenced
至这2xpclk 输出 信号 (承载和 50pf).
Video encoder模式s
Combinations of the twosign一个ls moD1一个d mOD0 select 这vario美国 powersavingmodes 一个s shownbe低.
Tabl e3•VideoEncoderModes
Frequency select modes
这 频率 select 输入 fsaffects 这 直流lk 和 aclk 输出作 显示 在下:
fs = 1 (default) dclk =40.5 mhz, aclk = 16.934 mhz
fs = 0 dclk =33.9mhz, 交流lk = 11.289MHz
MOD1 MOD0 video encoder 模式
11NTSC
10PAL
0 1 pal-60
0 0 睡眠 模式 (encoder 的f,两个都 plls 运动)