6
步伐 3
任何 excess fiber protruding 从
这 连接器 终止 将 是 截 止;
不管怎样, 这 修整 fiber
应当 扩展 在 least 1.5 mm
(0.06 在) 从 这 连接器 终止.
insert 这 连接器 全部地 在 这
polishing fixture 和 这 修整
fiber protruding 从 这 bottom
的 这 fixture. 这个 塑料 polish-
ing fixture 能 是 使用 至 polish
二simplex 连接器 或者 simplex
闭锁 连接器 simultane-
ously, 或者 一个 duplex 连接器.
便条:
这 四 dots 在 这
bottom 的 这 polishing fixture
是 wear 指示信号. 替代
这 polishing fixture 当 任何
点 是 非 变长 visible.
典型地, 这 polishing fixture
能 是 使用 10 时间; 10 duplex
连接器 或者 20 simplex
连接器, 二 在 一个 时间.
放置 这 600 grit abrasive paper
在 一个 flat 平整的 表面, pressing
向下 在 这 连接器, polish 这
fiber 和 这 连接器 使用 一个
图示 第八 模式 的 strokes
直到 这 连接器 是 完全齐平 和
这 bottom 的 这 polishing
fixture. wipe 这 连接器 和
fixture 和 一个 clean cloth 或者
tissue.
步伐 4
放置 这 完全齐平 连接器 和
polishing fixture 在 这 dull 一侧
的 这 3
µ
m pink lapping 影片 和
continue 至 polish 这 fiber 和
连接器 为 大概 25
strokes. 这 fiber 终止 应当 是
flat, 平整的 和 clean.
这个 缆索 是 now 准备好 为 使用.
便条:
使用 的 这 pink lapping
影片 fine polishing 步伐 结果
在 大概 2 db
改进 在 连接
效能 的 也 一个
传输者-接受者 link 或者 一个
bulkhead/splice 在 一个 600 grit
polish alone. 这个 fine polish 是
comparable 至 这 agilent
工厂 polish. 这 fine
polishing 步伐 将 是 omitted
在哪里 一个 extra 2 db 的 视力的
电源 是 不 essential, 作 和
短的 link 长度. 恰当的
polishing 的 这 tip 的 这 fiber/
连接器 面向 结果 在 一个 tip
直径 在 2.5 mm
(0.098 在.) 最小 和 3.2
mm (0.126 在.) 最大..
hfbr-4593 polishing kit